iso 9001 wire rope lifting slings
"
1-1 / 8 "वायर रोप एंड स्टॉप, क्लोज्ड स्पेल्टर सॉकेट
1-1/8" Closed Spelter Socket, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description The Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. Our Closed Spelter Socket is made in accordance with RR-S-550D requirements, and available for wire rope with a diameter from 1/4" to 5".
EN 13411-4 70mm वायर रोप स्लिंग असेंबली, 5:1 शॉर्ट बो सॉकेट
70mm Wire Rope Sling with Short Bow Socket, Closed Spelter Socket Sling, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description Short Bow Socket is a closed spelter socket. The socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. Our Short Bow Socket meets RR-S-550D (type B) requirements and is
1 इंच ओपन स्वेज सॉकेट वायर रस्सी जस्ती कार्बन स्टील
1" Wire Rope Sling with Open Swage Socket (with cotter pin), long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description A swage socket is attached to the end of a wire rope sling by using a hydraulic machine and special dies. Our open design swage socket features a spring pin that can attach wire rope sling to another type of fitting. The socket is forged from high tensile steel, while galvanization ensures its long-term durability. They are available
3/8 "वायर रस्सी स्लिंग असेंबली, एएसएमई बी 30.9 बंद स्वेज सॉकेट:
3/8" Wire Rope Sling with Closed Swage Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description Swage sockets are used with a swaging machine to terminate wire ropes. This type of socket is more resistant to wire fatigue at the point of connection between the socket and cable, but it does not always have as much break strength efficiency as a spelter socket. The swage socket is attached to the end of a wire rope sling by using a hydraulic
एफएफ-टी-276बी माइल्ड स्टील 3 इंच थिम्बल वायर रोप स्लिंग, थिम्बल आई स्लिंग
3" Wire Rope Sling with Heavy Duty Thimble, Eye Sling, greater protection against wear and deformation of the wire rope eye Wire Rope Sling and Wire Rope attachment Product Description Our Heavy Duty Thimble is designed for use with high-performance wire rope. The thimbles meet the performance requirements of Federal Specification FF-T-276B Type III. The thimble creates a 'hard' eye at wire rope ends, making it features greater protection against wear and deformation of the
1770 MPa स्टील कोर वायर रोप स्लिंग्स चार टांगों के साथ
Two-leg Swaged Wire Rope Sling (Steel Core) The wire rope slings feature 6 x 37 (a)+ IWRC construction classification, with 1770 MPa in tensile strength. Product Description - Surface treatment of wire ropes can be galvanized and grease free,galvanized with grease and uncoated with grease. - The wire rope structure, tensile strength and working load limit could be customized upon request. - Safety factor is 5:1 for the sling, 4:1 for the Master Link and Hook, and 6:1 for the
फाइबर कोर हैंड स्प्लिस्ड वायर रोप स्लिंग असेंबली गैल्वेनाइज्ड स्टील मटेरियल
Hand Spliced Wire Rope Sling (Fibre Core) Product Description A Hand Spliced Wire Rope Sling is constructed when the end of a single-part wire rope is bent back along the rope to create a looped eye shape, and strands at the end of this eye are then tucked back inside the body of the rope by hand. The eye shape helps to create a sling that can be used for a variety of applications. Hand-spliced ropes can be complete without the need for a thimble, while they often being
बड़े व्यास केबल स्लिंग जस्ती इस्पात तार रस्सी रखी
Cable Laid Sling (Large Diameter Wire Rope Sling) Description Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. This type of end fittings for wire rope sling is made depending on the specific application and the strength required for the lifting set. They are generally
ASME B30.9 2 इंच वायर रोप थ्रेडेड स्टड, थ्रेडेड टर्मिनल स्टड
2" Wire Rope Sling with Stainless Steel Threaded Swage Stud, Terminals for Wire Rope, long-term durability Wire Rope Sling and Wire Rope End Fittings Description Our Threaded Swage Studs are available for wire rope with a diameter from 1/4" to 2-1/4", thread sizes from M12 to M90. The Threaded Swage Studs are designed to be swaged or crimped into position. Available in left- or right-handed thread. Metric threads available upon request. They are forged from high tensile
