protection wire rope sling
"
डीएनवी 2.7-1 4 लेग वायर रस्सी स्लिंग
20 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set All of our DNV 2.7-1 Offshore Container Lifting Slings are produced according to our DNV Quality management approved system. When DNV revised the DNV 2.7-1 Certification Note, the most extensive changes were made in the lifting sling requirements. The sling is a four or five legged wire rope lifting sling fitted with
फ्लेमिश आई स्लीव और थिम्बल के साथ 38 मिमी डबल लेग वायर रोप स्लिंग
38mm Double-leg steel wire rope slings, swaged wire rope with Flemish Eye Sleeve and Thimble, steel core, equipped with Master Link Two-leg wire rope sling assembly, steel core Product Description Our Double-leg Wire Rope Sling Assemblies (with steel core) feature 6 x 37 (a) + IWRC Construction, with 1770MPa in tension strength. The wire ropes with soft eye are swaged, which means that the end has been folded back on itself, and spliced into the rope. An eye on its own is
एन 13414-1 22 मिमी डबल लेग स्टील वायर रस्सी स्लिंग असेंबली:
22mm Double-leg steel wire rope slings, fibre core, swaged wire rope with Flemish Eye Sleeve and Thimble, equipped with Master Link Two-leg wire rope sling assembly, fibre core Description Our Double-leg Wire Rope Sling Assemblies (with fibre core) feature with soft eye sling being swaged, which means that the end has been folded back on itself, and spliced into the rope. To strengthen the soft eye, a thimble eye would be pressed with a ferrule, using many tonnes of force to
EN 13411-4 70mm वायर रोप स्लिंग असेंबली, 5:1 शॉर्ट बो सॉकेट
70mm Wire Rope Sling with Short Bow Socket, Closed Spelter Socket Sling, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description Short Bow Socket is a closed spelter socket. The socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. Our Short Bow Socket meets RR-S-550D (type B) requirements and is
1-5 / 8 "वायर रस्सी स्लिंग असेंबली, 5: 1 बंद स्वेज सॉकेट:
1-5/8" Wire Rope Sling with Closed Spelter Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Description Closed spelter socket is a common type of socket. It has a hole that is made for a pin or bolt. Closed and open spelter socket also named as poured socket. Our Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization
ओपन स्पेल्टर सॉकेट के साथ 50 मिमी वायर रस्सी स्लिंग असेंबली Assembly
50mm Wire Rope Sling with Open Spelter Socket (with cotter pin), long-term durability Wire Rope Sling and Wire Rope End Fittings Description Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. This type of end fittings for wire rope sling is made depending on the specific
5:1 90mm वायर रोप स्लिंग असेंबली, EN 13411-4 ओपन स्पेल्टर सॉकेट
90mm Wire Rope Sling with Open Spelter Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description The open design spelter socket is attached to the end of a wire rope cable by pouring zinc or resin to create the termination. This hardens to hold the socket into place. This type of wire rope slings are used in many wire rope and structural strand termination applications where a high strength, permanent end attachment is required. They are
3/8 "वायर रस्सी स्लिंग असेंबली, एएसएमई बी 30.9 बंद स्वेज सॉकेट:
3/8" Wire Rope Sling with Closed Swage Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description Swage sockets are used with a swaging machine to terminate wire ropes. This type of socket is more resistant to wire fatigue at the point of connection between the socket and cable, but it does not always have as much break strength efficiency as a spelter socket. The swage socket is attached to the end of a wire rope sling by using a hydraulic
12 टन तार रस्सी गोफन विधानसभा
12 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set When DNV revised the DNV 2.7-1 Certification Note, the most extensive changes were made in the lifting sling requirements. The sling is a four or five legged wire rope lifting sling fitted with a quad assembly and shackles. Each component of the lifting sling is specified to the capacity of the container. The sling is
